The Roadsafe forged radius arms will strengthen your vehicle, stop it wandering and keep it straight. ADR compliant, including GVM upgrades with front axle up to 1660kg. Supplied with Australian made hybrid rubber bushings, guaranteed for the life of your purchase.
Some key features of the forged radius arms include:
• Increased caster
• Increased clearance to tie rod arm
• 1.5 times stronger than OE at GVM increase
• Only 700 grams heavier than OE
• Increased ground clearance compared to OE
• 15mm longer to correct wheelbase on lifted vehicles
• Australian made hybrid rubber bushings with lifetime warranty
Designed to fit behind the bushing (as per the Spacers), the PATRAMBC simply ‘cups’ the bushing, and offers the bushing retention option to customers that do not require the Radius Arm spacers. Suits Lift - Standard.
Radius Arm Spacers
Designed to fit GQ and GU Patrols with coil fronts, the Roadsafe Radius Arm Spacer Kit is primarily used to 'push' the front diff forward (approx. 15mm) to give better clearance for larger tyres so they don't hit the front mud flaps and guards. Another common issues with the Patrols is for the standard radius arm washers to bend following excessive impacts, which can result in premature failure of the arm. Bigger tyres also generally means bigger shocks with longer travel. This increase in travel can put additional stress on the rear radius arm rubber bushings, causing them to distort and become dislodged. The high tensile Roadsafe radius arm spacers, being stronger than standard washers, resist bending and aid in radius arm longevity.
The Roadsafe radius arm spacers are also designed in such a way as to 'cup' the rubber bushings, preventing them from being dislodged, resulting in improved bushing longevity. It is recommended that you check the clearance from your diff pumpkin to your panhard rod, at full compression, before and after fitting radius arm spacers. The Panhard Rod and Diff Pumpkin run very close on some GU Patrols depending upon other suspension work that has been done on the vehicle. Pushing the diff forward with the spacers can result in the panhard rod making contact with the diff or the front radius arm, affecting the articulation of the panhard, which can place additional stress on the Panhard welds and brackets, leading to premature failure. Suits lift 60mm+ Kit Radius Arm (Pair) Forged for Toyota Land Cruiser Dpf Models 2017+ 76/78/79 Caster & Clearance Adjusted (3-5)
